Epson C11CA16201 Christmas Deals!. Product: Epson C11CA16201 List Price: $899.99 Average customer review: Amazon Price: Too low to display Click Here To See Amazon Sale Price Add to cart to see low price@ Availability: In Stock Usually ships in 24 Hours Free Shipping Available

Compare Prices on Epson C11CA16201

I ordered my Epson R2880 about a month ago from Amazon, as a replacement for my genuine broken-down Epson 2000P which was about seven years faded. My recent printer arrived very promptly a few days later. The Vista software installation went smoothly except for the fact that a couple of the amber "ink-empty" lights did not work properly, one never came on and one was flickering, like on and off. (These shrimp lights are located in the ink well, they all (should) arrive "on" upon printer startup, then go "off", one by one, as each ink cartridge is inserted into the well.) The first couple of prints I made were not ample, but I soon discovered that with this printer expend only Epson paper and be definite to lift the particular type of paper on the camouflage before commencing printing. I then printed several color and B/W sample prints, examined them under a loupe, and I must say they were enormous. I was impressed with the quality.

Everything seems to bustle smoothly for the first week or so, although I noticed that the printer had a tendency to earn prolonged nozzle cleaning sessions. One session lasted between 6 and 7 minutes. That's when I started to glimpse at the ink levels charts. This printer is really using the ink I belief. I then noticed stout random dots, about 3mm in diameter on some of my prints, sometimes only an hour after a novel start-up nozzle cleaning session. My last printing endeavor on this printer - fair following a nozzle cleaning session - were eight 4x4" images where these dots showed up on five prints, some were in the margins and some proper on the image itself.

Calling Epson was quite an experience. The person told me to simply do a nozzle desirable. I told him I had unbiased done nozzle cleans, but he insisted and I did it. The first print out had the renowned 3mm dots on the paper and the print. Do the nozzle well-organized again, he said. At this point I confronted him with the demand of how grand ink a nozzle elegant required because my ink indicators showed a decrease in ink level of about 15% with each cleaning. He had no acknowledge to that, or to any of my other questions, including the amber light put a question to.

I was now out of ink and had a lot of unwanted dots on many of the prints I had made. At this point I knew I would never feel comfortable using a position of inks priced at about $125. and only wind up with a handful of usable images. I returned the printer as I was tranquil within the 30 days grace period.

One last observation: It appears to me, after reading other reviews, that the ink/nozzle picotechnology is perhaps late the curve of where it ought to be. In the quest for smaller and smaller picoliter dots, perhaps a different nozzle cleaning technology is required. At least, upscale future printers like this R2880 should have the ability to honest orderly one (1) color nozzle at a time, as user required, instead of necessarily cleaning all eight colors at a cost I figure to be about $18. to $20. per cleaning session.

Tage Blytmann

I am an artist who creates giclee prints of my paintings, and old an Epson Stylus Photo 2200 for six years. It was a marvelous printer which gave me high quality prints. The Epson Stylus Photo 2200 worked immense from day one, and I never had to yelp with an Epson tech.

I purchased the Epson Stylus Photo R2880 as a replacement printer. It would not print 13" x 19" paper. I kept getting paper jams and error messages stating I was using the outrageous media for the paper tray. I spent hours on the phone with Epson techs, who finally told me the printer had a outrageous paper sensor.

I returned the first Epson Stylus Photo R2880 and purchased a second printer. The second Epson Stylus Photo R2880 not only had the same problems, but it also gave me communication errors. I spent another hour on the phone with an Epson tech who refused to call me help as my calling card ran out of minutes.

In my idea Epson has inadequate service techs, bad customer service, and a awful quality product in the Epson Stylus Photo R2880. I hold this printer was never tested in a urge to salvage it to market. The only reason it even deserves one star is because it prints 8.5" x 11" sheets. Because my need is for a printer that prints 13" x 19" sheets, I cannot recommend this printer.

PS. Does anybody know where I can find a refurbished Epson Stylus Photo 2200?

I bought this printer mainly because of additional feature of the CD/DVD assure printing, as my Epson R2400 does not have this capability. After completion of installation of the software, ink, etc., the printer went into what seemed like an extended cleaning mode. After printing one 7x5 image, the printed showed the photo gloomy ink approximately one-quarter left. The rest of the ink levels had dropped to almost one-half level. Two days later, I turned on the printer and the printer seemed to kick into another cleaning cycle, and an extended one at that! After the printer was in the cleaning cycle for approximately four minutes, I noticed the printer icon bouncing in the dock at the bottom of the computer cover. When I opened the software, it showed me that the photo shadowy ink was completely consumed and the printer wanted it replaced. I replaced the photo dismal ink and after approximately two more minutes of printer titillating the head left and fair, I was able to print. After printing a tall total of eight 7x5 images, the rest of the inks were totally out! At this point, I made arrangements to have the printer replaced. Well, I got the novel printer and unfortunately, it has behaved the same as the first one. The only dissimilarity being that all of the inks went down almost even as opposed to the photo sunless ink going down first. After a total of two print sessions, all of the inks were consumed by the printer. For the whole place of inks, I managed to print ONLY TWO 2.5 high-tail x 1.4 trip size images! Actually, I had to replace the light light dismal ink along the plot. I searched the internet and found no complaints with this way. I have no conception what is going on. All I can say is that this is not the case of user error as I have been using inkjet printers for a while (Canon S800, Epson 1270, Epson 2200, and Epson 2400) .

Epson C11CA16201 Review, Compare, Prices, Discounts. Product: Epson C11CA16201 List Price: $899.99 Average customer review: Amazon Price: Too low to display Click Here To See Amazon Sale Price Add to cart to see low price@ Availability: In Stock Usually ships in 24 Hours Free Shipping Available

Compare Prices on Epson C11CA16201

I ordered my Epson R2880 about a month ago from Amazon, as a replacement for my steady veteran Epson 2000P which was about seven years former. My novel printer arrived very promptly a few days later. The Vista software installation went smoothly except for the fact that a couple of the amber "ink-empty" lights did not work properly, one never came on and one was flickering, like on and off. (These diminutive lights are located in the ink well, they all (should) near "on" upon printer startup, then go "off", one by one, as each ink cartridge is inserted into the well.) The first couple of prints I made were not obedient, but I soon discovered that with this printer spend only Epson paper and be certain to recall the particular type of paper on the conceal before commencing printing. I then printed several color and B/W sample prints, examined them under a loupe, and I must say they were vast. I was impressed with the quality.

Everything seems to urge smoothly for the first week or so, although I noticed that the printer had a tendency to develop prolonged nozzle cleaning sessions. One session lasted between 6 and 7 minutes. That's when I started to survey at the ink levels charts. This printer is really using the ink I understanding. I then noticed tremendous random dots, about 3mm in diameter on some of my prints, sometimes only an hour after a fresh start-up nozzle cleaning session. My last printing endeavor on this printer - objective following a nozzle cleaning session - were eight 4x4" images where these dots showed up on five prints, some were in the margins and some legal on the image itself.

Calling Epson was quite an experience. The person told me to simply do a nozzle smart. I told him I had unbiased done nozzle cleans, but he insisted and I did it. The first print out had the eminent 3mm dots on the paper and the print. Do the nozzle orderly again, he said. At this point I confronted him with the inquire of how distinguished ink a nozzle desirable required because my ink indicators showed a decrease in ink level of about 15% with each cleaning. He had no respond to that, or to any of my other questions, including the amber light expect.

I was now out of ink and had a lot of unwanted dots on many of the prints I had made. At this point I knew I would never feel comfortable using a position of inks priced at about $125. and only wind up with a handful of usable images. I returned the printer as I was smooth within the 30 days grace period.

One last observation: It appears to me, after reading other reviews, that the ink/nozzle picotechnology is perhaps gradual the curve of where it ought to be. In the quest for smaller and smaller picoliter dots, perhaps a different nozzle cleaning technology is required. At least, upscale future printers like this R2880 should have the ability to honest well-organized one (1) color nozzle at a time, as user required, instead of necessarily cleaning all eight colors at a cost I figure to be about $18. to $20. per cleaning session.

Tage Blytmann

I am an artist who creates giclee prints of my paintings, and old an Epson Stylus Photo 2200 for six years. It was a estimable printer which gave me high quality prints. The Epson Stylus Photo 2200 worked big from day one, and I never had to jabber with an Epson tech.

I purchased the Epson Stylus Photo R2880 as a replacement printer. It would not print 13" x 19" paper. I kept getting paper jams and error messages stating I was using the imperfect media for the paper tray. I spent hours on the phone with Epson techs, who finally told me the printer had a putrid paper sensor.

I returned the first Epson Stylus Photo R2880 and purchased a second printer. The second Epson Stylus Photo R2880 not only had the same problems, but it also gave me communication errors. I spent another hour on the phone with an Epson tech who refused to call me relieve as my calling card ran out of minutes.

In my understanding Epson has inadequate service techs, bad customer service, and a bad quality product in the Epson Stylus Photo R2880. I maintain this printer was never tested in a hurry to rep it to market. The only reason it even deserves one star is because it prints 8.5" x 11" sheets. Because my need is for a printer that prints 13" x 19" sheets, I cannot recommend this printer.

PS. Does anybody know where I can rep a refurbished Epson Stylus Photo 2200?

I bought this printer mainly because of additional feature of the CD/DVD stammer printing, as my Epson R2400 does not have this capability. After completion of installation of the software, ink, etc., the printer went into what seemed like an extended cleaning mode. After printing one 7x5 image, the printed showed the photo sad ink approximately one-quarter left. The rest of the ink levels had dropped to almost one-half level. Two days later, I turned on the printer and the printer seemed to kick into another cleaning cycle, and an extended one at that! After the printer was in the cleaning cycle for approximately four minutes, I noticed the printer icon bouncing in the dock at the bottom of the computer hide. When I opened the software, it showed me that the photo sad ink was completely consumed and the printer wanted it replaced. I replaced the photo dark ink and after approximately two more minutes of printer inviting the head left and accurate, I was able to print. After printing a mountainous total of eight 7x5 images, the rest of the inks were totally out! At this point, I made arrangements to have the printer replaced. Well, I got the fresh printer and unfortunately, it has behaved the same as the first one. The only disagreement being that all of the inks went down almost even as opposed to the photo shadowy ink going down first. After a total of two print sessions, all of the inks were consumed by the printer. For the whole position of inks, I managed to print ONLY TWO 2.5 stride x 1.4 toddle size images! Actually, I had to replace the light light dark ink along the procedure. I searched the internet and found no complaints with this method. I have no conception what is going on. All I can say is that this is not the case of user error as I have been using inkjet printers for a while (Canon S800, Epson 1270, Epson 2200, and Epson 2400) .